LORA RA-02 433MHZ LONG RANGE WIRELESS TRANSRECEIVER

Availability:

Out of stock


454 Inc GST

Out of stock

this is a Ra-02 LoRa (Long-range Radio) module will take your IoT projects the distance with communication over a long-range spread spectrum. This form of wireless communication results in a larger bandwidth, increasing interference resistance, minimizing current consumption, and increasing security.

This module uses for  SX1278 IC and works on a 433MHz frequency. Frequency hopping—which gives you that sweet balance of quality signal transmission—will cover a range of 420-450MHz. This long range wireless capability is packed into a small (17 x 16mm) package and delivered without an antenna.

With the LoRa Ra-02, you don’t have to compromise in the balance of range, interference immunity, or energy consumption. The technology behind this IC means that it’s perfect for those projects requiring range and strength.

Note: If you would like to add the breakout board and male header pin to your order, please select “Yes” in the Available Options section.

 

Features:

  • LoRaTM spread spectrum communication
  • +20dBm – 10mW. Stable RF output power when input voltage changed
  • Half-duplex SPI communication
  • Programmable bit rate can reach to 300kbps
  • Support FSK, GFSK, MSK, GMSK, LoRaTM and OOK Modulation Mode
  • 127dB RSSI wave range.
  • Automatically detect RF signal, CAD mode and super high speed AFC
  • With CRC 256 bytes data engine
  • Half hole (castellated hole)  SMD package
  • With metal shielding case

Specifications LORA RA-02 433MHZ LONG RANGE WIRELESS TRANSRECEIVER:

  • Wireless Standard: 433MHz
  • Frequency range: 420 – 450MHz
  • Port: SPI/GPIO
  • Operating Voltage: 1.8 – 3.7V, default 3.3V
  • Working Current, receive: less than 10.8mA(LnaBoost closed, Band 1)
    transmit: less than 120mA(+20dBm),
    Sleep model: 0.2uA
  • Working temperature: -40- +85 degrees
  • Pin pitch: 2.0 mm

Pin-out

Ra-01 Ra-02 Pin Description
1 ANT Antenna
2 1, 2 GND GND
3 3 3.3V 3.3V Power in
4 4 RESET Reset
5 5 DIO0 Digital IO0, software setting
6 6 DIO1 Digital IO1, software setting
7 7 DIO2 Digital IO2, software setting
8 8 DIO3 Digital IO3, software setting
9 9 GND GND
10 10 DIO4 Digital IO4, software setting
11 11 DIO5 Digital IO5, software setting
12 12 SCK SPI Clock input
13 13 MISO SPI data output
14 14 MOSI SPI data input
15 15 NSS SPI Selected-IN
16 16 GND GND

SKU: PRA-RC-0635 Category:

SHOPPING CART

close
Select an available coupon below
× How can I help you?