48V E Bike Hub motor Kit 17 inch 1000W
This 48V E Bike Hub motor Kit 17 inch 1000W for the Bike is very easy to use and max 2-6 hrs assembly time. this hub motor carries a capacity up to 250 -290kg. the motor voltage will be 60V and you can use any Li-ion 48V 45 Ah or LFP battery we recommended use (LIFEPO4)
A Hub Motor Scooter Kit 48V 1000W Hub motor Kit 17 inch for E Bike is the most common type of motor you’ll see on cheaper E-bikes, with the motor integrated into the front or rear wheel.
The latter is more common, but a few e-bikes even have motors on both wheels. A hub drive directly applies torque to the wheel, operating independently of your bike’s gears. e-bike hub motor or mid-drive motor is a BLDC motor. that can’t run on DC directly, it needs a controller. The controller takes the DC and converts it into a variable frequency 3 phase AC
A hub motor commonly is planned in one of three arrangements. Considered least down to earth is a hub motion engine, where the stator windings are commonly sandwiched between sets of magnets. The other two arrangements are both radial designs with the motor magnets bonded to the rotor; in one, the inner rotation motor, the rotor sits inside the stator, as in a conventional motor. In the other, the outer-rotation motor, the rotor sits outside the stator and rotates around it. The application of hub motors in vehicular uses is still evolving, and neither configuration has become standard
Specification;
Rated voltage | 48 |
Rated power | 1000 |
Peak power | 3590 |
no-load RPM | 595 |
tire Size | 90-100/17 |
Torque | 34.09 |
Max torque | 64 |
carrying capacity | 100-250 kg |
speed | 55-60 |
Package includes:
- 48V 1000W motor 1x
- 48V 50A controller 1x
- Throttle 1x
- DCDC converter 1X