Product Features BLDC Motor Controller Driver
- To see the speed it can be connected with a speed display board.
- Drive parameters can be set by connecting it to a computer as well.
- Current and speed double closed-loop design, large torque at low speed, stable operation
- High torque and high speed output, Max. speed 10000rpm /min (depending on motor speed) With pulse speed output, you can observe the motor speed at any time
- Speed regulation mode: 0-5V analog and 100Hz-100 KHZ PWM
Speed regulation - It has EN (enable), DIR (direction) and other signal input terminals
- Can output speed measurement pulse, (photoelectric isolation, gate output)
Electrical performance
- Power supply: DC24V ~ 48V DC power supply
- Output maximum current: no more than 5A (depending on the motor and rated load)
- Input maximum power: maximum 240W
- Adapted motor: Adapted to motor with output power ≤180W
- Insulation resistance:> 500MΩ at normal temperature
- Insulation strength: 0.5KV for 1 minute at normal temperature and pressure
52W BLDC Motor Controller Driver Applicable environmental parameters
- Cooling method: natural air cooling (forced air cooling is recommended)
- Use occasions: try to avoid dust, oil and corrosive gas
- Temperature: 0 ° C ~ + 50 ° C
- Humidity: <80% RH, no condensation, no frost
- Vibration: 5.9m / s + Max
- Storage temperature: -20 ° C ~ + 65 ° C
- Dimensions: 96 * 61.5 * 21.5mm
- Weight: about 0.15kg
package includes:
1X 52W BLDC Motor Controller Driver
