Electric Vehicle Battery Charger 60V 6Amp Plastic case

A 60V 10Amp Electric Vehicle Battery Lithium Charger is a device that is used to charge the battery of an electric vehicle (EV). It is typically an off-board charger, meaning that it is not part of the EV itself, but is instead a separate unit that is plugged into the EV’s charging port.

The charger converts AC power from the mains into DC power that is suitable for charging the EV’s battery. The charger also includes safety features, such as over-current protection and over-voltage protection, to help prevent damage to the battery.

Here are some of the typical specifications of a 60V 10Amp Electric Vehicle Battery Lithium Charger:

• Input voltage: 100-240VAC
• Output voltage: 60VDC
• Output current: 6A
• Charger type: Off-board
• Cooling: Fan-cooled
• Dimensions: 7x15x29 (in CM)
• Weight: 900gm

The charging time for an EV battery will vary depending on the size of the battery and the output current of the charger. For example, a 60V 10Ah battery would take approximately 6 hours to charge using a 60V 10Amp charger.

It is important to use the correct charger for your EV battery. Using an incorrect charger could damage the battery or even start a fire. Always consult your EV’s owner’s manual for the recommended charger type and specifications.

technical details ;

1. Voltage Output: 60 volts (V)
2. Current Output: 6 amps (A)
3. Power Output: 360 watts (W) (Calculated by multiplying voltage and current: 60V * 6A = 360W)
4. Input Voltage: Typically supports a range of input voltages, such as 100V-240V AC.
5. Charging Method: Typically uses a constant current, constant voltage (CC-CV) charging method, suitable for charging lithium-ion batteries commonly found in electric vehicles.
6. Charging Connector: Equipped with a plug or connector compatible with the electric vehicle’s charging port. The specific connector type may vary depending on the vehicle model and charging standards
7. Safety Features: Includes protections against over-voltage, over-current, short circuit, overheating, and reverse polarity to ensure safe charging operations.
8. Display: May have an LED  indicate charging status, voltage, current, and other relevant information.
9. Size and Weight: The physical dimensions and weight of the charger may vary depending on the manufacturer and model, but it is typically designed to be compact and portable.
10. Certifications: Compliant with relevant safety and quality standards, such as CE, UL, FCC, or others depending on the intended market and regulatory requirements.
11. Compatibility: Designed to be compatible with electric vehicles that use a 60V battery system.
12. Efficiency: Designed for high efficiency to minimize energy loss during the charging process, typically above 90%.
13. Cooling: This may incorporate a fan or passive cooling system to dissipate heat generated during charging and maintain optimal operating temperature.
14. Charging Time: The charging time will depend on various factors such as the battery capacity, state of charge, charger output, and charging algorithm. Generally, it can take several hours to fully charge an electric vehicle battery from empty to full.