This is a GENS ACE LIPO BATTERY 14.8V 5500MAH 45C 4S Lipo Battery Pack that comes pre-equipped with the industry-standard XT60 connector., no soldering required!!
With a maximum discharge rate of 90C, this 4S 5500mAh lipo pack is ready to give you all the power you need, whatever your application.
Gens Ace batteries deliver full capacity & discharge as well as being the best value batteries in the hobby market today! Trust Gens Ace for long LiFe and consistent durability run after run.
FEATURES:
- Stable automatic stacking technology enables single-cell capacities of 5500mAh.
- Best raw material and excellent workmanship to fulfill customer needs.
- High reliability and automatic production line to guarantee high quality and consistent performance.
- Small in size and light in weight.
SPECIFICATIONS
- Minimum Capacity: 5500mAh
- Configuration: 4S1P / 14.8 V / 4 cells
- Discharge Rate: 45C
- Max Burst discharge Rate: 90C
- Net Weight(±20g): 526g
- Dimensions: 135.5m Length x 42mm Width x 42mm Height
- Balancer Connector Type:JST-XHR
Battery Configurations
Voltage – The pack’s rated voltage is determined by the number of lipo cells placed in series. Instead of indicating the voltage, packs will sometimes indicate the number of cells in series (indicated by #S, where # is the number of cells in series). To determine the voltage of these battery packs, you multiple the number of cells in series by the cell voltage (3.7v).
1S = 3.7V
2S = 7.4V
3S = 11.1V
4S = 14.8V
Capacity – The battery capacity is based on two things. The reason we refer to these in blocks is that in order to double the capacity of a pack, the total number of cells must be double. On a 1S pack (single cell in series), a cell placed in parallel will double the capacity. However, to double the capacity of a 2S pack, a 2S block must be placed in parallel with the existing block (Figure 3). Some examples:
1s2p = 2 cell (single cell voltage, twice the capacity)
2s1p = 2 cell (twice the voltage, single-cell capacity)
2s3p = 6 cell (twice the voltage, three times the capacity)
C Rating – The final section criteria for battery packs is their C rating. The C rating of the battery is the maximum continuous discharge rating of the lipo cells and it determines how many amps your system can pull from the pack without overheating it. Discharging batteries at higher rates will raise their temperature and can lead to combustion.
To actually determine how many amps a battery can supply, multiply the battery pack’s Amp-Hour capacity by the C rating. An example of a 2000mAh battery pack at 10C:
2000mah / 1000 x 10C = 20 amps
Typical C ratings are 10C, 15C, 20C, 25C, 30C. Make sure the battery packs have the appropriate C rating to power your system.
LIPO Safety & Warnings
- never use a NiCd/NiMH charger to charge LiPo batteries. Only use chargers designed for Lithium Polymer (LiPo) batteries.
- never store LiPo batteries in any location that exceeds 40-80° F (e.g. in a car, garage, or in the sun)
- never leave charging batteries unattended. Keep watch on the charging process & react to any potential problems that may occur.
- never let the battery’s positive and negative leads touching. This can cause the battery to short and lead to a FIRE. If for any reason you need to cut the terminal wires, it will be necessary to cut each wire SEPARATELY, to make sure the wires do NOT touch each other.
- STOP the charging process and disconnect the battery immediately
- Disconnect the battery from the device immediately.
- Place it in an open non-flammable area.
- Watch it for approx. 30 minutes from a safe distance.
- Follow proper procedure to dispose of the battery
- If there are, STOP charging the battery and follow the proper procedure to dispose of the battery.
- ALWAYS charge batteries in a fireproof container and away from combustible material. Do NOT charge on surfaces that can catch fire – this includes wood, cloth, carpet, or in the application’s device.
- ALWAYS store LiPo batteries in cool, dry places between 40-80° F.
- If the battery reaches high temperatures in the event of an R/C Model crash, follow these steps:
- Disconnect battery immediately from the device
- Place it in an open non-flammable area.
- Watch it for approx 30 minutes from a safe distance.
- If the battery appears to be stable (no signs of damage or swelling) proceed to put it back into your device and continue using it with caution.
- Keep LIPO batteries out of reach of children or pets.
Drones parts
Package Includes :
1X GENS ACE LIPO BATTERY 14.8V 5500MAH 45C
