LIPO BATTERY 11.1V 2200mAH 40C 3S Lithium polymer (LIPO) rechargeable battery with XT60
LIPO BATTERY 11.1V 2200mAH 40C Lithium Polymers take this technology to the next step by improving its chemistry. The primary technological difference is that the electrolytes are held in a polymer composite (as in Lithium polymer) instead of an organic solvent.
Battery specification
- Voltage (V): 11.1V
- battery String (S): 3S
- Single-cell Voltage (V): 3.7V
- C Rating (C): 40C
- Current (A): 2200mah
- Weight: 203grm
- Dimensions :L * W * H – 120*33*25 (in MM)
- Continuous Discharge: 50C
- Max. Discharge: 50C for 8 sec
- Balance Connector: JST-XH
- Discharge Connector: XT60
Battery Configurations
Voltage – The pack’s rated voltage is determined by the number of lipo cells placed in series. Instead of indicating the voltage, packs will sometimes indicate the number of cells in series (indicated by #S, where # is the number of cells in series). To determine the voltage of these battery packs, you multiple the number of cells in series by the cell voltage (3.7v).
1S = 3.7V
2S = 7.4V
3S = 11.1V
4S = 14.8V
Capacity – The battery capacity is based on two things. The reason we refer to these in blocks is that in order to double the capacity of a pack, the total number of cells must be double. On a 1S pack (single cell in series), a cell placed in parallel will double the capacity. However, to double the capacity of a 2S pack, a 2S block must be placed in parallel with the existing block (Figure 3). Some examples:
1s2p = 2 cell (single cell voltage, twice the capacity)
2s1p = 2 cell (twice the voltage, single-cell capacity)
2s3p = 6 cell (twice the voltage, three times the capacity)
C Rating – The final section criteria for battery packs is their C rating. The C rating of the battery is the maximum continuous discharge rating of the lipo cells and it determines how many amps your system can pull from the pack without overheating it. Discharging batteries at higher rates will raise their temperature and can lead to combustion.
To actually determine how many amps a battery can supply, multiply the battery pack’s Amp-Hour capacity by the C rating. An example of a 2000mAh battery pack at 10C:
2000mah / 1000 x 10C = 20 amps
Typical C ratings are 10C, 15C, 20C, 25C, 30C. Make sure the battery packs have the appropriate C rating to power your system.
LIPO Safety & Warnings
- never use a NiCd/NiMH charger to charge LiPo batteries. Only use chargers designed for Lithium Polymer (LiPo) batteries.
- never store LiPo batteries in any location that exceeds 40-80° F (e.g. in a car, garage, or in the sun)
- never leave charging batteries unattended. Keep watch on the charging process & react to any potential problems that may occur.
- never let the battery’s positive and negative leads touching. This can cause the battery to short and lead to a FIRE. If for any reason you need to cut the terminal wires, it will be necessary to cut each wire SEPARATELY, to make sure the wires do NOT touch each other.
- STOP the charging process and disconnect the battery immediately
- Disconnect the battery from the device immediately.
- Place it in an open non-flammable area.
- Watch it for approx. 30 minutes from a safe distance.
- Follow proper procedure to dispose of the battery
- If there are, STOP charging the battery and follow the proper procedure to dispose of the battery.
- ALWAYS charge batteries in a fireproof container and away from combustible material. Do NOT charge on surfaces that can catch fire – this includes wood, cloth, carpet, or in the application’s device.
- ALWAYS store LiPo batteries in cool, dry places between 40-80° F.
- If the battery reaches high temperatures in the event of an R/C Model crash, follow these steps:
- Disconnect battery immediately from the device
- Place it in an open non-flammable area.
- Watch it for approx 30 minutes from a safe distance.
- If the battery appears to be stable (no signs of damage or swelling) proceed to put it back into your device and continue using it with caution.
- Keep LIPO batteries out of reach of children or pets.
Drones parts
Package Includes :
1X LIPO BATTERY 11.1V 2200mAH 40C 3S
