NEMA17 Planetary Geared BLDC Motor 25kg-Cm 52W with
DRIVER
Description
planetary reducer & gearbox is a kind of transmission mechanism. It utilizes the speed transducer of the gearbox to reduce the turnover number of the motor to the required one and obtain a big torque. How does a planetary gearbox work? We can learn more about it from the structure.
The main transmission structure of the planetary gearbox is planet gear, sun gear, and ring gear. a ring gear is located in close contact with the internal gearbox case. The sun gear driven by the external power lies in the center of the ring gear. The rotation of the planet gears drives the output shaft connected with the carrier to output the power.
NEMA17 Planetary Geared BLDC Motor 25kg-Cm 52W with DRIVER :
Planetary speed reducer & gearbox There are lots of advantages, like small size, lightweight, high load capability, long service life, high reliability, low noise, large output torque, a wide range of speed ratio, high efficiency and so on.
Specification of NEMA 17 BLDC Motor :
| Technical Specification | |
| ORANGE | U |
| GRAY | V |
| BROWN | W |
| BLACK | GND |
| YELLOW | H1 |
| GREEN | H2 |
| WHITE | H3 |
| RED | VCC (+5V) |
| Series/phase number | 8/3 |
| Rated voltage | 24 |
| Rated/peak torque (Nm) | 0.125/0.4 |
| Rated / no-load speed (RPM) | 4000/500 (RPM) |
| 36 Technical parameters of planetary reducer | |
| Gear ratio | 01:5.18 |
| length(L2) | 27mm |
| Efficiency | 93% |
| Return Difference | ≤ 60 arcmin |
| weight | 155g |
| Rated load | 1Nm |
| Max load | 2.5Nm |
| protection grade | 65 IP |
| lubrication | Grease |
| noise | ≤ 45 dB |
BLDC Motor Controller Driver
Product Features BLDC Motor Controller Driver
- To see the speed it can be connected with a speed display board.
- Drive parameters can be set by connecting it to a computer as well.
- Current and speed double closed-loop design, large torque at low speed, stable operation
- High torque and high speed output, Max. speed 10000rpm /min (depending on motor speed) With pulse speed output, you can observe the motor speed at any time
- Speed regulation mode: 0-5V analog and 100Hz-100 KHZ PWM
Speed regulation - It has EN (enable), DIR (direction) and other signal input terminals
- Can output speed measurement pulse, (photoelectric isolation, gate output)
Electrical performance
- Power supply: DC24V ~ 48V DC power supply
- Output maximum current: no more than 5A (depending on the motor and rated load)
- Input maximum power: maximum 240W
- Adapted motor: Adapted to motor with output power ≤180W
- Insulation resistance:> 500MΩ at normal temperature
- Insulation strength: 0.5KV for 1 minute at normal temperature and pressure
Applicable environmental parameters
- Cooling method: natural air cooling (forced air cooling is recommended)
- Use occasions: try to avoid dust, oil and corrosive gas
- Temperature: 0 ° C ~ + 50 ° C
- Humidity: <80% RH, no condensation, no frost
- Vibration: 5.9m / s + Max
- Storage temperature: -20 ° C ~ + 65 ° C
- Dimensions: 96 * 61.5 * 21.5mm
- Weight: about 0.15kg
package include:
- 1x NEMA17 Planetary Geared BLDC Motor 25kg-Cm 52W With Driver
Motor Drawing :
